首先先點選編譯器中setting->Compiler
之後在Search directories中的Compiler中加入openCV的include檔
之後在Linker中加入lib檔
在Linker setting中加入名為cv210,cxcore210還有highgui210的檔案
-------------------------------------------------------------分隔------------------------------------------------------
把OpenCV和GULT合併再一起。以下有程式碼
* GLUT Shapes Demo
*
* Written by Nigel Stewart November 2003
*
* This program is test harness for the sphere, cone
* and torus shapes in GLUT.
*
* Spinning wireframe and smooth shaded shapes are
* displayed until the ESC or q key is pressed. The
* number of geometry stacks and slices can be adjusted
* using the + and - keys.
*/
#ifdef __APPLE__
#include <GLUT/glut.h>
#else
#include <GL/glut.h>
#endif
#include <stdlib.h>
static int slices = 16;
static int stacks = 16;
/* GLUT callback Handlers */
static void resize(int width, int height)
{
const float ar = (float) width / (float) height;
glViewport(0, 0, width, height);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
glFrustum(-ar, ar, -1.0, 1.0, 2.0, 100.0);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity() ;
}
static void display(void)
{
const double t = glutGet(GLUT_ELAPSED_TIME) / 1000.0;
const double a = t*90.0;
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glColor3d(1,0,0);
glPushMatrix();
glTranslated(-2.4,1.2,-6);
glRotated(60,1,0,0);
glRotated(a,0,0,1);
glutSolidSphere(1,slices,stacks);
glPopMatrix();
glPushMatrix();
glTranslated(0,1.2,-6);
glRotated(60,1,0,0);
glRotated(a,0,0,1);
glutSolidCone(1,1,slices,stacks);
glPopMatrix();
glPushMatrix();
glTranslated(2.4,1.2,-6);
glRotated(60,1,0,0);
glRotated(a,0,0,1);
glutSolidTorus(0.2,0.8,slices,stacks);
glPopMatrix();
glPushMatrix();
glTranslated(-2.4,-1.2,-6);
glRotated(60,1,0,0);
glRotated(a,0,0,1);
glutWireSphere(1,slices,stacks);
glPopMatrix();
glPushMatrix();
glTranslated(0,-1.2,-6);
glRotated(60,1,0,0);
glRotated(a,0,0,1);
glutWireCone(1,1,slices,stacks);
glPopMatrix();
glPushMatrix();
glTranslated(2.4,-1.2,-6);
glRotated(60,1,0,0);
glRotated(a,0,0,1);
glutWireTorus(0.2,0.8,slices,stacks);
glPopMatrix();
glutSwapBuffers();
}
static void key(unsigned char key, int x, int y)
{
switch (key)
{
case 27 :
case 'q':
exit(0);
break;
case '+':
slices++;
stacks++;
break;
case '-':
if (slices>3 && stacks>3)
{
slices--;
stacks--;
}
break;
}
glutPostRedisplay();
}
static void idle(void)
{
glutPostRedisplay();
}
const GLfloat light_ambient[] = { 0.0f, 0.0f, 0.0f, 1.0f };
const GLfloat light_diffuse[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_position[] = { 2.0f, 5.0f, 5.0f, 0.0f };
const GLfloat mat_ambient[] = { 0.7f, 0.7f, 0.7f, 1.0f };
const GLfloat mat_diffuse[] = { 0.8f, 0.8f, 0.8f, 1.0f };
const GLfloat mat_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat high_shininess[] = { 100.0f };
/* Program entry point */
#include<opencv/highgui.h>
int main(int argc, char *argv[])
{
IplImage * img=cvLoadImage("a.png");
///宣告指標變數,把圖讀近來
cvShowImage("week07",img);
cvWaitKey(0);///任意鍵,再繼續
glutInit(&argc, argv);
glutInitWindowSize(640,480);
glutInitWindowPosition(10,10);
glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH);
glutCreateWindow("GLUT Shapes");
glutReshapeFunc(resize);
glutDisplayFunc(display);
glutKeyboardFunc(key);
glutIdleFunc(idle);
glClearColor(1,1,1,1);
glEnable(GL_CULL_FACE);
glCullFace(GL_BACK);
glEnable(GL_DEPTH_TEST);
glDepthFunc(GL_LESS);
glEnable(GL_LIGHT0);
glEnable(GL_NORMALIZE);
glEnable(GL_COLOR_MATERIAL);
glEnable(GL_LIGHTING);
glLightfv(GL_LIGHT0, GL_AMBIENT, light_ambient);
glLightfv(GL_LIGHT0, GL_DIFFUSE, light_diffuse);
glLightfv(GL_LIGHT0, GL_SPECULAR, light_specular);
glLightfv(GL_LIGHT0, GL_POSITION, light_position);
glMaterialfv(GL_FRONT, GL_AMBIENT, mat_ambient);
glMaterialfv(GL_FRONT, GL_DIFFUSE, mat_diffuse);
glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular);
glMaterialfv(GL_FRONT, GL_SHININESS, high_shininess);
glutMainLoop();
return EXIT_SUCCESS;
}
-------------------------------------------------------------分隔------------------------------------------------------
讓球旋轉並且在上面印圖片
#include <opencv/highgui.h> ///for cvLoadImage()
#include <opencv/cv.h> ///for cvCvtColor()
#include <GL/glut.h> ///3D glut
#include <stdio.h>
GLUquadric * quad;
GLuint id;
float angle=0;
void display()
{ glEnable(GL_DEPTH_TEST); ///要啟動 Detph Test 深度值的測試,3D顯示才正確
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glPushMatrix();///自動轉很帥
glRotatef(90, 1,0,0);
glRotatef(angle, 0,0,1);///自動轉很帥
gluQuadricTexture(quad, 1);
gluSphere(quad, 1, 30, 30);///glutSolidTeapot(0.3);
glPopMatrix();///自動轉很帥
glutSwapBuffers();
}
void timer(int t)
{ glutTimerFunc(20, timer, 0);/// 1000 msec 50fps:20msec
angle+=1;///自動轉很帥
glutPostRedisplay();
}
int myTexture(char *filename)
{
IplImage * img = cvLoadImage(filename); ///OpenCV讀圖
cvCvtColor(img,img, CV_BGR2RGB); ///OpenCV轉色彩 (需要cv.h)
glEnable(GL_TEXTURE_2D); ///1. 開啟貼圖功能
GLuint id; ///準備一個 unsigned int 整數, 叫 貼圖ID
glGenTextures(1, &id); /// 產生Generate 貼圖ID
glBindTexture(GL_TEXTURE_2D, id); ///綁定bind 貼圖ID
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖T, 就重覆貼圖
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖S, 就重覆貼圖
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); /// 貼圖參數, 放大時的內插, 用最近點
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); /// 貼圖參數, 縮小時的內插, 用最近點
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img->width, img->height, 0, GL_RGB, GL_UNSIGNED_BYTE, img->imageData);
return id;
}
void myInit()
{ quad = gluNewQuadric();
id = myTexture("a.png");///要把你的 image.png放到執行目錄裡
}///ex. C:\Users\Administrator\Desktop\freeglut\bin 裡面, 看你的電腦在哪裡
int main(int argc, char**argv)
{ glutInit(&argc, argv);
glutInitDisplayMode(GLUT_DOUBLE | GLUT_DEPTH);
glutCreateWindow("3D");
glutDisplayFunc(display); ///顯示
glutTimerFunc(0, timer, 0);
myInit(); ///我的 init 初始化 把貼圖準備好 前面OpenCV 2行, 後面 OpenGL 9行
glutMainLoop();
}
沒有留言:
張貼留言